Main application field of the B-Series Process Automats is the production of low to middle viscous emulsions and suspensions.
Typical applications are the production of
□ Soup, sauce and gravy,
□ Ketchup and mayonnaise,
□ Fish farce,
□ lnjection brine,
□ Pate and tureen, as well as the reconditioning of rework,
□ The preparation of process materials, such as additives and spices for the sausage-, petfood- and processed cheese production
The emulsifying is done through a separate cutting system.
The cutting system consists of a knife head, which rotates with the motor shaft, and an interchangeable hole plate, which is fixed in the cutting housing.
The hole size in the hole plate determines the quality of emulsifying.
Karl Schnell Emulsifier/Mixer.
KARL SCHNELL GRINDER SPECIFICATION: KS Process Automat B 22 Type 300l
Execution
- total volume mixer bowl approx. 380 l, nominal volume approx. 300 l
- stationary design.
- direct drive of cutting set, stainless steel motor shaft
- stainless steel execution, 1.4301
- standard accessories
Main lid
- hinged lid with seal, max. opening angle 80°
- safety switch with time delay
Pre-cutter system
- for cutting and mixing
- cutting set with two 3 winged knives
- three phase current motor P = 9,2 kW, n = 2 880 rpm at 480 V / 60 Hz, IP 55
Emulsifier system
- to homogenize and to pump
- cutting housing/hole plate Ø 150 mm
- cutting set with one stainless steel knife head and one hole plate.
- cutting set adjustment via nut and counter nut
- 2-winged knife head with exchangeable insert blades
- insert blades and hole plate in tool steel.
- three phase current motor P = 9,2 kW, n = 2 880 rpm at 480 V / 60 Hz, IP 55
Electrical execution
- mounted switch box, manual control, press buttons and displays are installed in the front door of the switch box, with additional Plexiglas protection cover
- voltage/frequency 480 V / 60 Hz/ 3 Ph
- control voltage 24V DC
Agitator with wall scraper B 22
Main lid reinforced, pneumatically operated
- made of stainless steel 1.4301, except gear motor, shaft seal, limit switch and scraper blade
- opening of the main lid max. 80°
- proxy switch for exact stop position of the agitator
- gear motor with break installed on the main lid
- painted SEW gear motor with stainless steel cover, IP 55
- the wall scraper cleans the cylindrical part of the vessel
- easily changeable wall scraper blade made of reinforced PTFE.
Additional Prep Fees May Apply
